9000 kitchen mixer

Discontinued

The FM Mattsson 9000 kitchen mixer has a harmonious, classic design. Standard features include a hot water lock, adjustable flow control, a soft-close mechanism and a ceramic seal. These features eliminate the risk of scalding, and protect the pipes by preventing water hammering. With its popular, user-friendly design, this has been Sweden’s best selling mixer for many years.

Description
Chrome, with CU Ø10 mm
Article number
91010000
EAN
7319049101023

PROPERTIES

  • Ceramic cartridge with soft closing function
  • Adjustable flow control and temperature limiter
  • With dish washer valve, switchable between cold and hot water. Pre-set on cold water
  • Swivel spout 110°
  • Hole diameter Ø32 mm
Backflow protection unit type AA
K 9000 Ettgreppsblandare med DM.jpg
No. FMM No. RSK Description
1 59303000 8591821 Soft closing headwork, complete, with lever 110 mm, chrome
1 59302000 8591973 Soft closing headwork, complete, with lever 110 mm, cold start, chrome
1 59306000 8591825 Soft closing headwork, complete, with lever 145 mm, chrome
1 59306190 8591852 Soft closing headwork, complete, with lever 190 mm, chrome (hospital model)
1 59306290 8591853 Soft closing headwork, complete, with lever 290 mm, chrome (hospital model)
2 59310000 8591763 Lever, complete, L=110 mm, chrome
2 59311450 8591827 Lever, complete, L=145 mm, chrome
2 59351900 8591832 Lever, complete, L=190 mm, chrome (not loop handle)
2 59352900 8591833 Lever, complete, L=290 mm, chrome (not loop handle)
3 38731006 8591765 Lock screw
4 59320000 8591766 Cover lid with colour marking
5 59330000 8591829 Cover ring, chrome
6 38051000 8241719 Fastening nipple,chrome
7 38050002 8242233 Fastening nipple
8 59110000 8591770 Ceramic cartridge, not cold start (red ring)
8 59120000 8591769 Ceramic cartridge, cold start (green ring)
9 37731005 8242259 Diverter, ejector
10 37731705 8242261 Diverter, ejector, Modell 2005-
11 37652459 8910664 Swivel spout with aerator and stop screw, L=250 mm, 110°, chrome
11 37651553 8241888 Swivel spout with aerator and stop screw, L=155 mm, 110° and fixed, chrome
12 29142200 8281524 Housing M22 int.
13 38080000 8241723 Stop screw
14 38230005 8141730 Limitation clapm for fixed spout and swivel 30-90°
15 37204029 8593089 Sealing rings, 2 pcs
16 37802850 8141748 O-ring 42,2x3,0
17 39141000 8186888 Fastening kit, for mixers without on/off valve
18 39142000 8186890 Fastening kit, for mixers with on/off valve
19 37802810 8141747 O-ring 39,2x3,0
20 39140000 8186889 Fastening kit for basin mixer
21 39070016 8141755 Fastening plate for two screws
22 39100000 8591708 Connection pipes, CU 10x363, chrome (for basin mixer)
22 39100500 8591857 Connection pipes, CU 10x363, raw brass (for mixers with on/off valve)
22 39101500 8591858 Connection pipes, CU 10x392, raw brass (for mixers without on/off valve)
23 59251000 8591834 On/off valve for dishwasher, complete
24 59271000 8591843 Ceramic cartridge for dishwasher
25 59261000 8591839 Knob for dishwasher
26 39030000 8295347 End cover, chrome, 2 pcs
27 29102419 8909483 Aerator insert, 11-15 l/min at 300kPa

modal.bvb.desc;

Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).

Leadfree

Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.

Energyclass

Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.

modal.sundahus.title

modal.sundahus.desc