9000E II shower mixer

Find retailers
Description
Chrome, 150 c/c, with self-closing valve
Article number
82134600
EAN
7391887246371

PROPERTIES

  • Pressure balanced thermostatic mixer
  • With Presto valve
  • For public baths and similar facilities
  • Flushing time: approx 30 sec.
  • With limited temperature stop at max 38°C (or other pre-set max. temp)
  • Approved non-return valves, EN-Standard EN1717
Backflow protection unit type EB
K 9000E II Säkerhetsblandare 160 cc och 150cc.jpg
No. FMM No. RSK Description
1 35782009 8592061 On/off handle, complete
2 39031006 8592062 Cover, black, 2 pcs
3 S600274 8397028 Ceramic headwork (G15)
4 38680009 8591701 Filter kit incl. o-rings and service tool
5 59810800 8592006 Inlet connectors 150 c/c (left-handed thread)
5 59800800 8592005 Inlet connectors, 160 c/c
6 S600275 8397029 Thermostatic cartridge, complete, incl. service tool
7 38520007 8591592 Scalding protection ring, standard (black)
8 35782109 8592063 Temperature handle, complete
8 35780150 Temperature handle, complete, max 38 °C
9 39710800 8591967 Nipple M18x1-G1/2 for shower mixer
10 39754000 8591969 Nipple M18x1 with o-ring for bath mixer
11 82990000 8154073 Swivel spout with integrated diverter
12 38086000 8439701 Locking screw
13 29142400 8281526 Housing M24 ext., 13 mm
14 38521000 8295345 Stop ring
15 35970150 8592055 Care-handle, black, 2 pcs
16 29102650 8281547 Aerator insert, 20–24 l/min at 300 kPa

modal.bvb.desc;

Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).

Leadfree

Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.

Energyclass

Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.

modal.sundahus.title

modal.sundahus.desc